-
Your cart is currently empty.
Fleck 5800SXT Electronic Meter-Demand Softener System |
|
| Advanced technology for advanced performance! The Fleck 5800SXT gives the user the benefit of unique programming and diagnostic features. One key NEW feature is the on-board super capacitor, which keeps the correct time during a power outage up to 48 hours! The programming is stored in memory and will not be lost due to power outages. You may also program the system’s regeneration sequence individually to maximize the efficiency and keep water use to a minimum. Another characteristic is the system keeps time electronically, so the drive motor only runs during regeneration, saving the possibility of motor burn-outs and running more reliably. The 5800SXT Electronic Meter-Demand system can cut salt and water use by as much as 40%! Unlike timer-based systems, the meter-demand system regenerates only when necessary. The end result? Significant savings in both water and salt.** ** Compared to a system with a timer-based regeneration. PLEASE USE CARE WHEN TIGHTENING THE METER CLIP SCREWS - SIMPLY TIGHTEN UNTIL THE CLIPS ARE IN PLACE - SNUG IS TOO TIGHT Estimated Delivery: 2-3 Weeks |
|
Included Accessories |
|
| Fleck 5800SXT Meter Valve |
|
| Plumbing Adapter (As Chosen from Options) |
|
| 8x44 Mineral Tank |
|
| 15x17 Rectangular Salt (Brine) Tank |
|
| Brine Tank Safety Overflow Assembly |
|
| 0.75 Cu Ft Hi-Capacity Resin, 8% Crosslink (Other Options Available) |
|
| Valve-to-Brine Tank Tubing, 6 Ft x 3/8” |
|
System Specifications |
|||
| Regen Type: | Meter Initiated | ||
| Timer Type: | Electronic | ||
| Cycle Type: | 5-Cycle Adjustable | ||
| Electrical Requirements: | 120vac / 60hz (Plug-In Transformer Included) | ||
| Limited Warranty: | 5 years (Valve), 10 years (Tank) | ||
| Service Flow Rate: | 21 gpm | ||
| Backwash Rate: | 17 gpm | ||
| Dimensions (WxDxH): | 23 x 15 x 53 | ||
| Shipping Weight: | 80 lbs | ||
Features |
|
| • | Continuous service flow rate of 21 GPM with a backwash of 17 GPM |
| • | Fully adjustable 3- or 5-cycle control for efficient and reliable water treatment system |
| • | Time-tested, hydraulically-balanced piston for service and regeneration |
| • | Optical sensor for precision cycle positioning |
| • | Soft water refill for a cleaner brine tank |
| • | Designed with double backwash for reduced hardness leakage |
| • | Diagnostics for historical valve performance |
Helpful Links & Downloads |
|
| • | Download -Fleck 5800SXT Spec Sheet |
| • | Download -Fleck 5800SXT Service Manual |
| • | Download -Fleck 5800SXT Installation Guide |
| • | Download -Fleck 5800SXT Warranty Sheet |
If the items in your order qualify for 'Free Shipping' and total $75.00 or more, your order ships FREE* and is applied to your cart at checkout! Order under this amount will be charged flat rate shipping of $14.95.
Learn more about our shipping policy to Alaska, Hawaii, and International shipping here.
*Free shipping to the Contiguous United States. (Lower 48 states only. Does not include Alaska or Hawaii.)
In these times we know that providing support for our customers is more important than ever. We are taking actions to keep our employees safe and following suggested guidelines. Delays may occur, but your orders will still be shipped.
