You are here: Home > Parts & Accessories > Brine Tanks
Sort By:
Page of 1
Brine Grid Support, 11x11 & 4" Hole
Brine Grid Support, 11x11 & 4" Hole
Our Price: $14.95

(1)

Brine Grid Support, 14x14 & 4" Hole
Brine Grid Support, 14x14 & 4" Hole
Our Price: $14.95

(4)

Brine Grid Support, 18" Circular & 4" Hole
Brine Grid Support, 18" Circular & 4" Hole
Our Price: $14.95

(7)

Brine Grid Support, 24" Circular & Supports
Brine Grid Support, 24" Circular & Supports
Our Price: $84.50

(1)

Includes:
  • Top plate with hole for 4" or 5" well size
  • Bottom plate
  • Supports (7) pre-cut to 12" (If you require a different size, please let us know when placing your order)
Brine Grid Support, 30" Circular & Supports
Brine Grid Support, 30" Circular & Supports
Our Price: $135.00

Includes:
  • Top plate with hole for 4" or 5" well size
  • Bottom plate
  • Supports (11) pre-cut to 12" (If you require a different size, please let us know when placing your order)
Brine Tank Lid ONLY, 14" Square
Brine Tank Lid ONLY, 14" Square
Our Price: $19.95

(1)

Brine Tube & Screen, 3/8" x 36"  - BPUT3836
Brine Tube & Screen, 3/8" x 36" - BPUT3836
Our Price: $7.90

Brine Tube & Screen, 3/8" x 36"  - BPUT3836. This brine pick up tube assembly is for use ONLY with softener systems that have air checks mounted to the control valve (such as the Autotrol 155 and 255 series). All other softener systems should use a brine pick up tube with an air check at the bottom - please see Fleck part 60002.
Fleck #500 Air Check Assembly, 34" - 60002-34
Fleck #500 Air Check Assembly, 34" - 60002-34
Our Price: $12.30

(2)

Fleck #500 Air Check Assembly, 34" - 60002-34
Fleck 2310 Brine Valve & Float Assembly
Fleck 2310 Brine Valve & Float Assembly
Our Price: $59.00

(4)

This assembly includes the following Fleck parts:
  • 1 - 60002-34 - Fleck #500 Air Check
  • 1 - 60014 - Fleck 2310 Brine Valve Assembly
  • 1 - 60068-30 - Fleck Float Assembly, 2310
Nut Assy, 3/8" Plastic - 19625
Nut Assy, 3/8" Plastic - 19625
Our Price: $2.06

Overflow Nut & Elbow Assembly - H1018
Overflow Nut & Elbow Assembly - H1018
Our Price: $3.50

(1)

Potassium Permanganate Feeder, 4 Oz - J717X-03
Potassium Permanganate Feeder, 4 Oz - J717X-03
Our Price: $77.75

Potassium Permanganate Feeder Assembly
Incorporates a non-pressurized storage tank and innovative grid design along with our dependable 464 float valve. The attractive 10”x16” tank is made of tough blow molded high density polyethylene, and contains an ultraviolet inhibitor (UVI) for increased resistance to sunlight.* It has a storage capacity of up to 30 pounds of Dry Weight Potassium Permanganate. Feeders are available in blue, almond, or black and can be ordered in two, four, or six ounce delivery capacities. The black injection molded cover is securely fastened with two stainless steel safety screws to prevent access by children and pets. The fill port on the cover also includes a child resistant closure. (As with all chemicals, the potassium permanganate chemical tank should be placed safely away from children or pets). Chemical warning and drain caution labels are affixed to the unit. The unique polypropylene felt grid pad retains even the finest grade of undissolved Potassium Permanganate above the grid. This permits efficient use of our assembly with all grades of Potassium Permanganate. Two and four ounce feeders have a grid platform height of 5 inches. Six ounce feeders have a grid plat-form height of 7-1/2 inches. The unit is shipped fully tested and assembled in individual cartons. Shipping weight is seven pounds. Please consult the factory for further information.

Iron & Manganese Removal
The recommended dose of Potassium Permanganate for MTM or Greensand filters is 1-1/2 to 2 ounces per cubic foot. For Greensand Plus™ please refer to the manufacturer’s data sheet. Correct water temperature is important to properly dissolve Potassium Permanganate. At 50°F (10°C) four ounces of Potassium Permanganate can dissolve in one gallon of water. At room temperatures (72°F - 22°C) eight ounces will dissolve in one gallon of water. For further information please contact our technical department.
Safety Brine Float - 60068-30
Safety Brine Float - 60068-30
Our Price: $9.80

(1)

Safety Brine Float - 60068-30
Safety Brine Valve Assembly, 2310 - 60014
Safety Brine Valve Assembly, 2310 - 60014
Our Price: $16.97

(1)

Safety Brine Valve Assembly, 2310 - 60014
Salt Tank CABINET - Hi Profile 35"
Salt Tank CABINET - Hi Profile 35"
Our Price: $109.86

  • Cabinet profile for use with 35" internal softener tanks
  • Dimensions 13.5" W x 22.5" D x 44" H (Height with cover, allow additional depth for plumbing)
  • 225LB Salt Capacity (When using internal 10X35 softener tank & salt platform)
Salt Tank, 11x34 Square
Salt Tank, 11x34 Square
Our Price: $39.00

(3)

150LB Salt Capacity (Up to 32,000 Grain Systems)
Salt Tank, 14x34 Square
Salt Tank, 14x34 Square
Our Price: $49.00

(3)

225LB Salt Capacity (Up to 48,000 Grain Systems)
Salt Tank, 18x33 Round
Salt Tank, 18x33 Round
Our Price: $59.00

(2)

375LB Salt Capacity (Up to 80,000 Grain Systems)
Salt Tank, 18x40 Round
Salt Tank, 18x40 Round
Our Price: $69.00

(3)

450LB Salt Capacity (Up to 96,000 Grain Systems)
Tube Insert, 3/8" Plastic - TI38P
Tube Insert, 3/8" Plastic - TI38P
Our Price: $0.27