Home > Meter-Demand Softeners > Fleck 9100SXT Twin >

Fleck 9100SXT Twin Alternating Water Softener - 32,000 Grain Capacity Per Tank
Fleck 9100SXT Twin 32000 Water Softener
 
Additional Views:


Our Price: $805.00


Availability::
Product Code: F-AR32-91SXT

Tank Color Option

  
Tank Jacket

  
Brine Tank Size

  
Res-Care Feeder

  
Resin Media Option

  
Turbulator Option

  
Plumbing Connection

  
Drain Tubing

  
Tannin Resin Option

  

Qty:  
Description
 
Simple, reliable, and easy-to-use, the Fleck 9100SXT Meter Alternating Valve is a cost-effective solution for softened water all the time!

Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100SXT valve, families benefit from soft water 24 hours a day, seven days a week. Thatís because the second tank acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates in preparation for the next alternation, giving you all the advantages of continuous soft water.

9100 System

The newest version of the rugged, time-tested Fleck 9100, the 9100SXT gives the user the benefit of unique programming and diagnostic features previously unavailable on the previous 9100SE. One key NEW feature is the on-board capacitor, which keeps the correct time during a power outage for up to 48 hours! You may also program the system's regeneration sequence individually to maximize efficiency and keep water use to a minimum. Also, the system keeps time electronically, so the drive motor only runs during regeneration, saving the possiblity of motor burn-outs.

Each 9100SXT valve is manufactured from glass-filled Noryl composite material. The 9100SXT valve has been engineered to withstand years of uninterrupted use. The Noryl construction is also impervious to corrosion.
Save money and be more efficient with up to 15% savings in both water and salt consumption over conventional single tank metered systems. Unlike preset single systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the softening capacity of tank in service. The end result? Up to fifteen percent savings in both water and salt.**

** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused.


This Product Includes:

  • Fleck 9100SXT Meter Valve
  • Plumbing Adapter (As Chosen From Options)
  • Twin 9x48 Mineral Tanks
  • 14x34 Square Salt Tank
  • 2.00 Cu Ft Hi-Capacity Resin, 8% Crosslink
  • Valve-to-Brine Tank Tubing, 6 Ft. x 3/8"
  • Brine Tank 2310 Safety Overflow Assembly
System Specifications:
  • Regen Type: Meter Initiated (0-9,999 gal)
  • Timer Type: Electronic
  • Cycle Type: 5-Cycle Adjustable
  • Electrical Requirements: 24vac/60hz (Plug-In Transformer Included)
  • Limited Warranty: 5 yrs Valve & 10 yrs Tanks
  • Service Flow Rate: 9.00 gpm @ 15 psi Drop
  • Backwash Rate: 2.00 gpm
  • Dimensions (WxDxH): 19x24x57
  • Shipping Weight: 170 lbs
Helpful Links & Downloads:
Average Customer Review: 5 of 5 Total Reviews: 16 Write a review.


  0 of 0 people found the following review helpful:
 
Great Water Softener 1 year review January 10, 2017
Reviewer: jarrod from Merced, CA United States  
I purchased the Fleck 9100SXT Twin Alternating Water Softener - 64,000 Grain Capacity Per Tank February of 2016 but wanted to wait to review until it had some time installed.
I must say it really is a fantastic softener, I previously had a rainsoft single tank softener unit and really liked it but had issues with the programming and didn't want to pay another $4000.00 for a unit I would have issues with. I do run res-care in my brine tank and every six months run sani-systems softener sanitizer liquid through the tanks to insure
The system stays sanatized. Other than that just add salt and the sanitizer should be run through any softener unit you choose every six months. Bottom line if your looking for a great softener for an amazing price, I highly recommend the 9100sxt.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Service November 21, 2016
Reviewer: Michael from Pinckney, MI United States  
From start to finish. Best price and service. Had a few questions after install. And Todd took time to walk me through the programming. The unit comes very professionally packed and install is a breeze.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fleck 9100 SXT December 16, 2015
Reviewer: Anonymous Person from Paridise Valley, AZ United States  
Received the Fleck 9100 SXT.  First of all, very impressed with the packaging.  The other suprise was the tanks were loaded with resin.
Very pleased with the whole process.  Thank you.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fleck Twin Demand 9100SXT May 7, 2015
Reviewer: Jeffrey from Grawn, MI United States  
I did a great amount of research before I ordered a fleck water softener. This system proved to be the best option out there for my needs.  I am absolutely sure that qualitywaterforless was the very best choice. This is the second review I have ever written, but the first time successfully sent. It is totally voluntary. I will strongly recommend this company to anyone.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works great...simple install April 17, 2015
Reviewer: Dan from Lakeville, MN United States  
I appreciated the help sizing my new water softener.  I replaced a Kinetico system which had been working poorly for several years.  The Fleck system arrived when promised, was packed very well, and all the parts were included.  It was all programmed and ready to go.  I installed it myself with the help of the online and other manuals shipped with the unit.  It is using less salt than my Kinetico and the water is as soft.  I couldn't be happier with it.

Two years ago I replace my back flushing Kinetico sand filters with two Fleck units.   The high rust content from my aeration system causes the Kinetico heads to malfunction and the local rep was useless.  The Fleck system worked so well on the iron removal system...it was an easy choice to go with them for the softener.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Meter-Demand Softeners > Fleck 9100SXT Twin
Meter-Demand Softeners