956 S. Bartlett Rd. #288
Bartlett, IL 60103
Hours: M-F 8AM-5PM (CST)
Aquatec Pressure Switch & Harness for Use With CDP6800, 24VAC
1/4" OD Tubing
3/8" OD Tubing [Add $4.65]
Aquatec's tank pressure switch is available to turn off the booster pump when the tank is full. It should be mounted in-line, as close to the tank as possible. The normally closed switch is pre-set at the factory for pressure On/Off range of 20-40PSI. It comes with 2 John Guest half cartridges, for either 1/4" or 3/8" tubing.
The switch also comes with a wiring harness for interconnection with your CDP6800 or CDP8800 pump and accessories.
Note: The pressure switch can be field modified to operate as a normally open switch by changing the wire terminal connector from the NC to the NO switch spade contact.
STANDARD FLOW Polishing Filter, 2.0" x 10" - 0.50gpm
Reverse Osmosis System 4-Stage & TFC Membrane
Liquatec - Titegrip 3/8" x 1/4" Shut Off Valve, Female Elbow
Wrench, Standard Slim Housings
Storage Tank, Blue Poly, 80.0 Gal. - 1-1/4" (24"x56")
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
RO Pump Kits