Home > Iron/Sulfur Removal >

BIRM Filter 1.0 Cu Ft & Fleck 5600SXT Backwashing Valve
Birm Iron Filter 1.0 Cu Ft
 
Additional Views:


Our Price: $451.75


Availability:: Usually Ships in 24 to 72 Hours
Product Code: F-56SXT-BF9

Tank Color Option

  
Tank Jacket

  
Plumbing Connection

  
Drain Tubing

  

Qty:  
Description
 
NEW!! Simple, reliable, and easy-to-use, the NEW Fleck 5600SXT Electronic Meter-Demand Valve is the newest version of one of the most popular systems used throughout the world today.

Advanced technology for advanced performance! The newest version of the rugged, time-tested Fleck 5600, the 5600SXT gives the user the benefit of unique programming and diagnostic features previously unavailable on the previous 5600SE. One key NEW feature is the on-board capacitor, which keeps the correct time during a power outage for up to 48 hours! You may also program the system's regeneration sequence individually to maximize efficiency and keep water use to a minimum. Also, the system keeps time electronically, so the drive motor only runs during regeneration, saving the possibility of motor burn-outs, and running more reliably.


BIRM - Iron & Manganese Reduction
Birm® is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies.
Birm, acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++ to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Birm provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods.
  • Under the proper conditions, no chemicals to purchase for maintenance.
  • Iron removal efficiency is extremely high
  • Negligible maintenance cost: only periodic backwashing required.
  • Durable material with a long life and wide temperature range
  • pH range of 6.8 - 9.0
  • Iron range of up to15ppm
  • Dissolved Oxygen (D.O.) content must be equal to at least 15% of the iron (or iron and manganese) content. Air Injection may be required otherwise.
  • Service flow rate of 5 gpm/sq ft (intermittently higher flows are possible)
  • Backwash flow rate of 10 gpm/sq ft
*** Important! - To ensure the proper operation of your iron filter, be sure that when sizing your iron filter system your well pump can deliver at least 20% more water than the backwash requirement of your intended system.


This Product Includes:
  • Fleck 5600SXT Backwashing Valve
  • Plumbing Adapter (As Chosen From Options)
  • 9x48 Mineral Tank
  • 1.00 Cu Ft BIRM & Gravel Underbedding
System Specifications:
  • Regen Type: Timeclock Initiated
  • Timer Type: Electronic
  • Cycle Type: 3-Cycle Adjustable
  • Electrical Requirements: 24vac/60hz (Plug-In Transformer Included)
  • Limited Warranty: 5 yrs Valve & 10 yrs Tank
  • Recommended Service Flow Rate: Up to 4.00 gpm
  • Backwash Rate: 5.00 gpm
  • Dimensions (WxDxH): 11x14x55
  • Shipping Weight: 120 lbs
Helpful Links & Downloads:
Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.


  0 of 0 people found the following review helpful:
 
Iron Removel December 3, 2013
Reviewer: Rodney from Lakeville, MA United States  
Hi first time ordering process was easy,product shipped and received as stated .I had to adjust clips that held on bypass valve it was to loose squeezed them in a vise.Installed tank and hole house filter turned on.

Was this review helpful to you?


Browse for more products in the same category as this item:

Iron/Sulfur Removal
Iron/Sulfur Removal > BIRM Systems